Serial Number Information
The serial number plate is usually located on the left front frame near the boom base or below the cab entrance.
Use your serial number to confirm fitment for boom cylinders, hydraulic pumps, swing motors, and track components.
Key Specifications
| Feature |
Specification |
| Engine Model |
Komatsu SAA6D107E-1, 6-cylinder turbocharged diesel |
| Emissions Tier |
Tier 3 compliant |
| Net Power |
148 HP (110 kW) @ 2,000 RPM |
| Operating Weight |
46,300 lbs (21,000 kg) |
Digging & Reach
| Feature |
Specification |
| Bucket Capacity |
0.66 – 1.57 cubic yards |
| Maximum Dig Depth |
21 ft 9 in (6.63 m) |
| Max Reach at Ground Level |
32 ft 5 in (9.88 m) |
Hydraulic & Travel Specs
| Feature |
Specification |
| Hydraulic Flow |
58 GPM (219 L/min) |
| Swing Speed |
11 RPM |
| Travel Speed – High |
3.6 mph (5.8 km/h) |
| Travel Speed – Low |
1.8 mph (2.9 km/h) |
Key Features
Tier 3 Power & Efficiency
The SAA6D107E-1 engine delivers 148 HP with clean Tier 3 emissions compliance, offering a balance of power and fuel economy ideal for high-production excavation.
Extended Digging Performance
With a maximum dig depth of 21 ft 9 in and over 32 ft of reach, the PC200LC handles deep utility trenching and broad material removal applications.
Smooth Hydraulic Response
The 219 L/min hydraulic flow ensures strong breakout force and fast cycle times, keeping operations efficient and responsive under load.
Long Carriage Stability
The LC (Long Carriage) design improves lifting capacity and stability on uneven ground, making it well-suited for slope work and large trench boxes.
Common Replacement Parts
Support your PC200LC with dependable parts available at Broken Tractor:
Engine & Fuel System
Turbochargers, injectors, fuel filters, EGR valves, oil coolers
Hydraulics
Hydraulic pumps, boom and arm cylinders, control valves, hose kits
Swing & Travel
Swing motors, slew bearings, final drives, travel motors, swing gearboxes
Undercarriage
Track chains, sprockets, rollers, idlers, track adjusters
Cab & Electrical
Monitors, joysticks, throttle motors, wiring harnesses, ignition switches
Maintenance Schedule
| Task |
Recommended Interval |
| Engine Oil & Filter |
Every 250 hours |
| Hydraulic Filter & Oil |
Every 500 hours |
| Fuel & Air Filter Change |
Every 250 hours |
| Final Drive Oil Check |
Every 1,000 hours |
| Swing Bearing Lube |
Weekly or after heavy use |
| Track Tension Inspection |
Weekly or every 50 hours |