John Deere 648G III Log Grapple Skidder

Description:

Weight: Operating Weight: Approximately 31,975 lbs (14,500 kg)

Description:

Key Specifications:

• Engine: John Deere 6068H Turbocharged Diesel
• Horsepower: 171 HP (127.5 kW) at 2,200 rpm
• Transmission: Direct-Drive Power Shift
  • Forward Gears: 8
  • Reverse Gears: 7
  • Max Forward Speed: 13.6 mph (21.9 km/h)
  • Max Reverse Speed: 10.2 mph (16.4 km/h)
• Grapple Type: Single Arch Grapple
  • Grapple Capacity: 10.45 ft² (0.97 m²)
  • Tong Opening at Tips: 9.59 ft (2.92 m)
• Winch: Optional; Max Line Pull: 43,449 lbs (19,700 kg)
• Hydraulic System:
  • Pump Flow: 42 gal/min (159 l/min)
  • System Pressure: 3,000 psi (207 bar)
• Fuel Capacity: 83 gallons (314 liters)
• Dimensions:
  • Overall Length: 25.64 ft (7.82 m)
  • Overall Width: 10.6 ft (3.23 m)
  • Height to Top of Cab: 9.95 ft (3.03 m)
  • Ground Clearance: 2.02 ft (0.62 m)
  • Wheelbase: 11.26 ft (3.43 m)

Serial Number Information: The Product Identification Number (PIN) plate is located on the upper rear corner of the engine frame. The engine serial number plate is on the right-hand side of the cylinder block, behind the engine oil filter. The hydraulic pump serial number plate is on the right-hand side of the hydraulic pump. If equipped, the winch serial number is located on the upper front of the winch housing.