CALL or TEXT (800) 909-7060
Back

Case 580N Backhoe Information

SKU:
580N
FitsModel:
Case 580N Backhoe
ListDescription:
Reference Information
Case 580N Backhoe Information | Broken Tractor
Fits Models:
Placeholder
Part # 580N

Description:

Case 580N Backhoe Information

  • Engine: The Case 580N Backhoe is powered by a 4-cylinder, turbocharged diesel engine that produces up to 85 horsepower.
  • Transmission: The backhoe has a 4-speed synchromesh transmission with a torque converter and shuttle shift.
  • Four-wheel drive: The backhoe has four-wheel drive with a limited slip differential, providing excellent traction on rough terrain.
  • Loader capacity: The loader bucket has a capacity of 1.25 cubic yards and can lift up to 6,850 pounds.
  • Backhoe capacity: The backhoe can dig up to 14 feet deep and has a maximum digging force of 11,517 pounds.
  • Operator comfort: The backhoe features an air-ride seat, adjustable armrests, and a tilting steering wheel for comfortable operation.
  • Maintenance: Regular maintenance is critical for keeping the backhoe in good condition. This includes oil changes, filter replacements, and regular inspections of hydraulic and electrical systems.
  • Safety: Always wear appropriate personal protective equipment when operating the backhoe. Follow all safety guidelines and be aware of your surroundings.
  • Transport: The backhoe is a large and heavy piece of equipment that requires a flatbed truck or trailer for transportation. Always ensure that the backhoe is securely fastened and balanced on the transport vehicle.
  • Storage: Store the backhoe in a secure location, such as a garage or warehouse, to protect it from the elements and prevent theft or damage. Consider covering the backhoe with a tarp or other protective covering.
  • Operator training: Proper training is essential for safe and effective operation of the backhoe. Operators should be familiar with all controls and safety features before operating the equipment.

 

ENGINE:

  • Model: Case F5C, Tier 4 Interim Emissions Certified
  • Type: Diesel 4-stroke, turbocharged
  • Cylinders: 4
  • Bore/Stroke: 3.90 x 4.33 in (99 x 110 mm)
  • Displacement: 207 in3 (3.4 L)
  • Fuel injection: Direct, high pressure common rail - HPCR
  • Fuel: Diesel
  • Air intake: Cross-flow
  • Cooling: Liquid
  • Engine speeds: Rated speed – full load: 2200, Low idle: 875 – 1025, High idle – no load: 2300 – 2450
  • Horsepower @ 2200 RPM: Gross: 85 hp (63 kW), Net w/ viscous fan: 83 hp (62 kW), Net: 78 hp (59 kW)
  • Maximum torque @ 1400 RPM: Gross: 276 lb·ft (374 N·m), Net w/ viscous fan: 274 lb·ft (372 N·m), Net: 268 lb·ft (364 N·m)
  • Radiator: Core type: Square wave, Core size area: 486 in2 (3145 cm2), Rows of tubes: 4
  • 39 degree fan: Style: 7 blade suction, Diameter: 19.65 in (499 mm), Ratio: 1.1:1
  • Water pump style: Integral
  • Engine oil pump: Deep sump plate cooler w/ pressurized under-piston nozzles, Pump operating angle ratings: Side to side: Rated 35°, Fore and aft: Rated 35°
  • Oil filtration: Replaceable, full flow spin-on

POWERTRAIN:

  • Transmission – standard: 4F-4R Power Shuttle Synchromesh Transmission manual gear shift, fully synchronized
  • Transmission – optional: Powershift S-Type, 4F-3R fully synchronized
  • Gear ratios: Forward/Reverse: 1st 5.603/4.643, 2nd 3.481/2.884, 3rd 1.584/1.313, 4th 0.793/0.657*
  • Travel speeds (mph/kph): Forward Reverse: 1st 3.8(6.1) 4.5(7.3), 2nd 6.1(9.8) 7.3(11.7), 3rd 12.9(20.8) 15.5(24.9), 4th 24.3(39.1) 29.1(46.9)*
  • Torque converter ratio: 3.2
  • Differential lock: On-the-go push-button activation
  • Front 4WD/Rear axle: Differential ratio: 2.0/2.5, Planetary hub ratio: 6.0/6.4, Total reduction ratio: 12.0/16.0
  • Service brakes: Individually applied, power assisted, hydraulically actuated, maintenance-free, self-adjusting, outboard mounted, wet disc, 2 per side. Disc area: 384 in2 (0.25 m2)
  • Parking brakes: Trans Mounted spring-applied hydraulic release – SAHR

ELECTRICAL:

  • Voltage: 12 Volts, negative ground
  • Alternator: 120 amp
  • Battery: 850 cold-cranking amps
  • Opt. batteries (2): 850 cold-cranking amps
  • Power plugs (2

Information Page Only

Shipping charges are calculated at checkout.
Items are NOT guaranteed to be in stock at the time of order.
Refunds are offered if the item is on back-order.

Can’t Find What You’re Looking For?

Our knowledgeable staff will be happy to help you with any of your tractor, backhoe, dozer, or engine parts needs.

1-800-909-7060 Parts Request Form

FEATURED PRODUCTS

Shipping & Return Policy

Do you need your part quickly? You're in luck! We have warehouses all over the country to ensure a quick and easy delivery time. Most of our parts ship from our warehouses the same day you place your order. And many times, orders are delivered in Two to Three days.

Our in house parts are manufactured following strict quality standards in our warehouse in Ohio. Parts such as hydraulic cylinders, pins, bushings, sheet metal, track adjusters, booms and dipper sticks are all ready to ship same day that they are purchased! With less time to wait for your shipment, you will be able to get back to work as quickly as possible.

Did you accidentally purchase the incorrect part? We offer returns and exchanges here at Broken Tractor. To proceed with a return, please call us toll free, and we will provide you with return authorization and a step by step return process for your convenience. We are more than happy to help you exchange your part for the correct one! Give us a call at 1-800-909-7060 and we would be pleased to help you.

Privacy Policy | Terms & Conditions

Copyright © 2024 Broken Tractor LLC - All Rights Reserved